50 VASI Pressure Transducers for the DAVINCI Mission
National Aeronautics and Space Administration — NASA SHARED SERVICES CENTERMississippi#80NSSC27948506Q
NASA/NSSC seeks 50 VASI Pressure Transducers for the DAVINCI Mission to monitor Venus's atmospheric pressure during descent. The transducers must be cylindrical, with three pressure ranges (0–1 bar, 0–10 bar, 0–100 bar), and meet stringent environmental and performance requirements including a 6.3-year design lifetime, -40 to +121°C operating range, and qualification for high shock, vibration, and radiation. as the sole provider. CST on November 16, 2026. Quotes will not be evaluated. The NAICS code is 334519.
On PublicBidSearch: the original bid posting, 3 bid documents and the agency contact (name, email and phone) for this bid.
Contact
Agency contact for this bidName, email and phone — included with ProProOverview
- Due
- Nov 16, 2026, 3:00 PM CT
- Time stated in bid documents
- Nov 16, 2026, 3:00 PM Central Time
- Submission
- Documents analyzed
- 3
Scope of work
- Cylindrical design with process port and electrical connector
- 6.3-year design lifetime including pre-launch, cruise, and descent phases
- Operate in -40 to +121°C temperature range
- Withstand 67.9 G acceleration and high shock levels
Steps to Bid
- 1
Register with NASA's Official linkPro system if not already registered.
- 2
Review the VASI Pressure Transducer Specification (VASI-SNSR-SPEC-0002, Revision -) and Statement of Work (VASI-SNR-SOW-0001) for full technical requirements.
- 3
Prepare a written capability statement addressing the ability to perform the work, including technical and management approach, past experience, and qualifications.
What you'll need
Submission
NAICS
334519
How to submit
Submit capability statement via email to [email available with Pro]. No hard copies or hand delivery required. Include the Notice ID in the subject line.
Get alerts for bids like this
New engineering bids in Mississippi
This bid has closed. We'll tell you when the next one like it posts. Free, no card needed.
Get alerts — freeProject details
NASA/NSSC has a requirement for 50 VASI Pressure Transducers to be used in the DAVINCI Mission, which will descend through Venus's atmosphere. The transducers are to be manufactured in three types: Low Pressure (0–1 bar), Medium Pressure (0–10 bar), and High Pressure (0–100 bar). Each transducer must be cylindrical with a process port and sensing diaphragm on one end and an electrical connector on the other. The transducers must withstand a temperature range of -40 to +121°C, random vibration (up to 2,000 Hz with GRMS of 10.21 for qualification), shock (up to 1527 G at 10,000 Hz), and 67.9 G quasi-static acceleration. They must have a proof pressure of 1.5 times the MEOP and a design burst pressure of 2.5 times the MEOP. The sensing diaphragm must be made of 718 Inconel, and all wetted materials must be corrosion-resistant (CRES) stainless steel (304L, 316L, or similar). The transducers must be cleaned to Level 100, R1 per IEST-STD-1246E. Each unit must be marked with manufacturer name, model number, serial number, date of manufacture, pressure range, proof pressure, excitation voltage, and output signals. The electrical output must be 1.5–10 mV per volt of excitation, with a 1000-ohm RTD for temperature compensation. The transducers must consume no more than 0.02 watts and have a maximum mass of 120 grams. The envelope must be less than 3.0 cm in diameter and 10.0 cm in length. The transducers must be qualified for radiation exposure (4.45 krad-Si TID, 2× margin) and must not be susceptible to single event latch-up or upset. designated as the sole provider. Central Standard Time on November 16, 2026. Quotes will not be considered.
Documents
- SATPC0043180_Tab_07_Capability_Statement.pdf1 pages
- SATPC0043180_Tab_04_Specs_Rev.pdf13 pages
- SATPC0043180_Tab_04_SOW_Rev.pdf13 pages
More from this agency
- Silicone Free Annealing Oven for Cleanroom Use at NASA Goddard Space Flight Center — closes Nov 19, 2026
- Request for Quotation (RFQ) 80NSSC27948896Q: Spare B-Dot Sensors and Baluns for Launch Complex 39B — closes Nov 19, 2026
- Fabrication and Delivery of Two 200-Gallon, 2,000 psig Pressure Vessels for TS405 at NASA White Sands Test Facility — closes Nov 19, 2026
- Recertification, Repainting, and Refilling of Anhydrous Ammonia Cylinders for Artemis III+ at NASA/KSC — closes Nov 20, 2026
- Transducers Needed for Artemis III Servicing — closes Nov 20, 2026
Similar open bids
- Request for Qualifications for Engineering Services — Homestead Water Association
- Request for Proposals for Engineering Services – College Street Improvements — Town of Mathiston
- Request for Proposals for Engineering Services – College Street Improvements — Town of Mathiston
- Request for Proposals for Engineering Services – College Street Improvements — Town of Mathiston
- Request for Quotation: Brand-Name WaterLinked Sonar Systems and Doppler Velocity Logs (DVL) — DEPT OF THE ARMY
Closing this week nearby
- Three Cummins Onan QD 6000 Diesel RV Generators, Brand Name or Equal To — closes Nov 19, 2026
- Request for Qualifications: Professional Engineering Services — closes Nov 19, 2026