PPublicBidSearch
OpenRFPCloses Nov 16, 2026

Supply and Delivery of 9 Complete Fire Escape Door Assemblies for FCC Lompoc Correctional Facility

Federal Prison System / Bureau of Prisons — FCC LOMPOCCalifornia#15B61727Q00000002

The Federal Bureau of Prisons (FBOP) at FCC Lompoc is seeking qualified vendors to supply and deliver nine (9) complete 90-minute fire-rated door assemblies for a correctional facility. The doors must be 36 inches wide by 80 inches high, constructed of minimum 12-gauge galvanneal steel with a ribbed, insulated core. The assemblies include frames, hardware, and all components must be UL Listed or labeled by a recognized third-party agency. The scope includes 4 left-hand outswing and 5 right-hand outswing doors. Hardware includes UL-listed hinges, panic hardware, 80-series locks, door closers, seals, and a threshold. All components must comply with NFPA 80, NFPA 101, IBC, IFC, OSHA, UL 10C, and UL 1784. Vendors must submit itemized pricing, lead time, compliance confirmation, and product data. Deliveries must be made between 7:30 a.m. and 2:00 p.m., Monday through Friday, excluding holidays. Submissions must be sent via email to [email available with Pro] in PDF format only.

Open Original Bid Source Pro

Overview

Due
Nov 16, 2026
Submission
email
Documents analyzed
3

Scope of work

  • Supply and delivery of 9 complete fire escape door assemblies
  • Ribbed and insulated core, mineral core preferred

Steps to Bid

  1. 1

    Register in Official linkPro and obtain a Unique Entity Identifier (UEI).

  2. 2

    Review the full solicitation document (15B61727Q00000002-BRQ.pdf) and all attachments.

  3. 3

    Ensure the quote includes itemized pricing, lead time, compliance confirmation, and product data.

What you'll need

Submission

Email

NAICS

332321

How to submit

Submit in PDF format via email to [email available with Pro]. No fax, hand delivery, or mail-in quotes will be accepted. Quotes must be good for 30 calendar days after close.

Pursuit snapshot

Pro
  • Go / no-go verdict on every requirement
  • 4 watch-outs that disqualify bidders
Unlock with Pro — $20/mo

Cancel anytime · no card to browse

Project details

The doors are for a prison facility application and must meet all relevant local, state, and federal fire and life safety codes. All components must be new, U.L. Listed or labeled by a recognized third-party testing agency acceptable to the Authority Having Jurisdiction (AHJ), and conform to the standards referenced herein. The complete door assembly (door, frame, and all hardware) shall be 90 minutes fire rated. Door material is hollow metal, minimum 12 gauge galvanneal steel. Frame type is knock-down (KD) for drywall/unit masonry or welded for masonry. Frames are to be prepared for 80 series lock, keyed 2 sides strike, surface pull on both sides, and prepped for PA closer. Finish is factory primed for field painting. Required hardware includes: 3 heavy-duty steel ball bearing hinges, UL Listed; 1 set panic hardware/fire exit hardware (rim or mortise type), self-latching, crossbar or touch bar device, operable with an applied force of 15 lbs or less; 1 set locking mechanism (80 series lock, keyed 2 sides strike, surface pull on both sides, prepped for PA closer); 1 unit heavy-duty, adjustable, surface-mounted door closer, UL Listed, self-closing and ensuring positive latching; 1 set smoke and draft control gasketing/seals; and 1 unit threshold (if required). All components must be tested under positive pressure conditions per NFPA 252 and ANSI/UL 10C. A permanent, legible fire rating label must be affixed to both the door and the frame and remain visible after installation. Vendors must confirm compliance with NFPA 80, NFPA 101, IBC, IFC, OSHA exit route requirements, UL 10C or NFPA 252, and UL 1784 (if smoke rating is required). Submission requirements include itemized pricing, proposed lead time, confirmation of compliance, and cut sheets/product data for all proposed items. POC: Mr. Fernando Pena, BOP Engineering Technician, [email available with Pro], or 805-735-2771. FBOP will be responsible for receiving or signing deliveries. FCC Lompoc will provide resources for loading and unloading materials or equipment upon arrival.

Key dates

Questions due
Nov 16, 2027, 1:00 PM Pacific Time
Bids due
Nov 16, 2026
Expected award
Nov 24, 2026

Documents

  • 15B61727Q00000002-BRQ.pdf28 pages
  • FCC_Lompoc_Fire_Door_Assembly_Combined_Synopsis.pdf3 pages
  • LOX_26Z6AL1_RplFireEscapeDoors_FCI_1_SOW_Approved..pdf4 pages

See all documents · Download with Pro

Contact

Agency contact for this bidName, email & phone — included with ProPro

More from this agency

Similar open bids

Closing this week nearby